 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Exterior furnace fan keeps running in off position
My exterior fan switch that brings in fresh air into house via the furnace is staying on, the switch next to thermostat ( for fan ) is turned off, the furnace is in off position.
Lennox merit series furnace... 2000sq ft home. I recently had a ozone blast (air purification) done in house, after that, that's when I had this issue ( related?) Thanks, Bill |
||||
Check out some similar questions!
I have a Rheem criterion gas furnace which works great ac/heat but I want to use the fan only without the ac/heat and the fan will not run in the on position but does run with the ac or heat on, any suggestion's... I put in a new thermostat and it is installed properly ( honeywell) I called the...
Goodman power vented multi-position gas furnace fan won't shut off. Only way to shut it off is at breaker box. Do I need a new thermostat?
Our ceiling fan (circa 1998, Gulf STream Model 978A/five blade) has the typical switch on the side of the housing to enable the fan to go clockwise or counterclockwise. Counterclockwise works at all three speeds. Clockwise does not work at all. Gives no indication (motor noise) that there is any...
I have a gas furnace that will only work when the fan is on "ON'. I changed the thermostat, same problem. Changed the circuit board, same problem. Changed the ignition modulator, same problem. Changed the fan motor, same problem. Any ideas?
Had some electrical work done at the house today (breaker box replaced). When the electrian turned the power back on, the air handler fan started running (it won't shut off unless you open the breaker). A/C works fine but the gas heater doesn't kick in. Fan position on the thermostat is in OFF...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
