 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Symmons temptrol repair
I had a pretty good leak and after replacing two of the washers from the repair kit, and putting the shower symmons valve back together the water will not shut off when I turn the control handle/valve all the way to the off position? Is there another internal part that is not working correctlu or needs to be replaced as well? Thanks Bob
|
||||
Check out some similar questions!
Tried to install a new trim kit on a 20 year old Symmons Temptrol shower/tub valve, but broke the end off the spindle (TA-10). Currently debating on the overall benefits of - repairing the old Temptrol (new spindle, maybe need new washers and/or seals) - replace with new unit (which...
I have a Symmons Temptrol with a problem. I recently installed an on demand hot water heater and when I was done, I can't get a hot bath. Really hot shower, but not a hot bath. I am trying to get the T-31 knob off and I can't get it off the spline on the TA-10. Been there 30 years. Any...
I have the above diverter in my bathroom. Recently it started to leak from the diverter handle that changes the use from tub to shower. I purchased the Symmons TA-25A Iverter Spindle to replace old. My problem is that I do not know how to remove the old spindle. Can anyone help me with my problem?
This is a symmons-temptrol. Leaking only at the tub spout. I don't know the model number but it is able to divert to either shower or tub. The tub spout leaks. What internal part should be replaced. I have a schematic listing parts T1 all the way to T55-c. The parts are further grouped in several...
I'm getting nothing but a dribble on hot and cold, tub or shower settings. Was fine until today. Any way to tell if it is the valve or seat? There's nothing else to replace, right? Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
