 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Resistance mass air flow sensor 1996 aerostar
We are replacing the mass air flow sensor on a 1996 aerostar. (Unfortunately we got a rebuilt one before finding out about cleaning them.) I want to test the new one to make sure it's good. I haven't been able to find information about what the ohm rating is supposed to be or which pins to test.
Help appreciated. |
||||
|
||||
|
Cleaning isn't always an effective repair but it's often worth a try. Test parameters for your Ford vary somewhat but they don't specify the resistance but would rather interpret voltage feedback at the ECM into gm/sec calculations. For example, at approx 0.94 gm/sec the ECM would "see" about 0.34VDC and at approx 88.91 gm/ sec the ECM would see about 3.9 VDC. Measurements should be done with a minimum 10M Ohm DVOM (adequate) or high impedance o-scope (preferred). |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can anyone tell me how to test air mass flow meter ( sensor)? I have 2003 Toyota corolla ( Altis in Philippine) 1.8G and has been running very well since I bought it new. Two days ago while driving to work, the car suddenly stopped, and will not start again. It had to be toed to Toyota and after...
I need to test a 1997 ford escort mass air flow sensor, I am not sure of the terminals to test being 4 of them, does anyone no? The car put out a code of p0102 and it idles a little rough when you put a load on the engine it dies.
Will a mass air flow sensor keep my 93 Pontiac 3300 from starting.While driving it just cut off and would not start. And if it does start it cuts off and will not start back .Fuel pump,fuel filter,crank sensor,have been replaced and the computure has been checked and swaped it out two times.Have...
I need help on checking the mass air flow sensor of the 2004 Ford Taurus ses 3.0l
I have a 1994 mustang gt, 5.0 ltr HO. I am going to put a 75mm throttle body with trick flow track heat intake and 24lb injectors. What size mass air flow sensor should I use. PLEASE HELP!!
View more questions Search
|
