 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Help, the fan blower on my furnace is noisy. I turned it off and manually spun the fan... it moved smoothly. Any suggestions?
My gas furnace motor has become very noisy something is rattling inside. I have removed the casing to the fan and squirrel cage is able to turn on the shaft. There is a locking ring with a small bolt but tightening this only locks it to the shaft, the cage is still able to turn on the shaft. I...
So, I have this new 95% Efficient York Infinity 9M modulating furnace recently installed. All seems to work but the noise when it runs (at the "low stage", I think) is "whirry" and just plain hard to get used to. It's not that loud, there are no vibrations, but there is just a constant machinery...
I have a Trane XE 70 furnace, manufactured around 1990. It has been serviced yearly since I purchased the home 6 years ago. About 2 months ago it began making a low pitch rumble after the burners ignite and before the fan kicks on. The rumble occurs 35 seconds after the burners ignite and lasts...
My furnace makes a banging/popping sound when it starts up and when it shuts off. What causes this?
View more questions Search
|
