Ask Experts Questions for FREE Help !
Ask
    ddwalsh's Avatar
    ddwalsh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 9, 2007, 07:27 AM
    Concrete Footers for Floor Jacks
    I have two sagging joists under the refrigerator in our kitchen and am having to place a floor jack in to lever a sagging joist in our home. There is a crawl space under it and am told I need to pour a concrete footer to support the jack. How big should the footer be?

    Tks.
    JudgeSmales's Avatar
    JudgeSmales Posts: 9, Reputation: 1
    New Member
    		  
    #2

    Jan 9, 2007, 09:51 AM
    It depends on the load size that it will support, but most likely 3' x 3' x 12"
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tile leak from 3rd floor through 2nd floor ceiling (bath) [ 5 Answers ]

Hi All: We renovated our third floor bathroom which included stripping the floor down and installing tiles (1" squares within 1' blocks). After our 3rd floor tenant takes long showers we get some leakage through her floor and thusly through our ceiling (which we now have partially open to have...

Proper underlayment for vinyl floor starting at floor joists [ 2 Answers ]

What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction...

Connect Dead Phone Jacks [ 2 Answers ]

I've recently moved into a house, and only 2 of the 6 phone jacks work. I only have one line... I've already compared the "working" jacks to the non-working jacks, and they seem to have a similar configuration. The outside wires are all going to line one. Any ideas how to get these phone jacks...

Wiring phone jacks [ 3 Answers ]

I need to rewire a phone jack back to a different number. How do I do this? Any help appreciated.

DSL and wiring phone jacks [ 1 Answers ]

I have phone svc through SBC and DSL stand alone through Qwest; was assigned a separate phone # for dsl svc and was told could not "piggyback" on same phone jack; trying to avoid paying $100 svc fee to qwest; have purchased separate jack but don't know what wires to attach where. Can anyone help?

View more questions Search