 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honda harmony lawn mower model HRB216TDA
My Honda Harmony lawn mower which is a three speed self propelled mower stopped driving, there was no unusual noise or sound at the time. Before I start taking things apart is there anything in particular that I should pay attention to or look for.
Any help would be greatly appreciated. Thanks Bill |
||||
|
||||
|
Hi, Most are driveshaft driven and that is the part that is supposed to fail. It will be under the covers at the rear, have spring clamps that can be squeezed with pliers to move and remove the pins at both ends(they usually just slide out.) That is where I would start if it is driveshaft driven. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a honda harmony. Got it with my house. Been working perfectly. Automatic transmission it seems. Won't move today. Checked the little plastic oil reservoir by the right rear wheel. It's dry. Do you use transmission fluid or something else. Don't want to screw it up.
I just inherited a Honda harmony riding lawn mower. Bought a new battery for it and it started right up. After I found the fuel shut off course. It will start up and idle all day but for some reason, once I engage anything (remove the parking “lock”, engage the blade, shift into gear from...
I need to level the deck on the mower and have no clue as to how to do it. How do I level the deck so the mower will mow an even depth.
I have had a pre-owned Honda Harmony series lawn mower for two years. It’s a great mower! But the last time I mowed, toward the end of the job, it stalled out, so I rolled it back into the garage for next time. Next time I tried to finish the job, it started strong then stalled out after 5 seconds...
I wanted to put a new set of blades on my Honda Harmony mower. I am having a difficult time removing the old blades. Any suggestions?
View more questions Search
|
