Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
I have a Hampton Bay ceiling fan for about 15 years. The lights work but the fan doe
[ 3 Answers ]
I have a Hampton Bay with a light. The light works but the fan does not. I can feel a slight hum of the motor and sometimes it appears the blades may move a bit but really there is nothing. It is about 15 yrs old. I have another one like this, same age and it works fine. Before I start taking...
Hampton Bay Ceiling fan not working, but lights do
[ 1 Answers ]
My HBCF stopped working recently. It does not have pull chains but does have a remote. I put a new battery in the remote. The switch on the wall is good. The fan has worked in the past. Someone mentioned adjusting the toggle switches on the remote. Where would I find the ones on the fan that...
Hampton Bay Fan Installed and Working BUT All Other Lights on Switch Board DON'T WORK
[ 1 Answers ]
I bought and installed a Hampton Bay Fan w. remote (Model 04889). After I wired the fan and tested it, nothing happened except the other lights connected to that circuit breaker flickered. I turned the power off and checked my connections. I realized I switched the two black wires on the remote...
New hampton bay motor not working, lights work
[ 3 Answers ]
Hi - I just installed a new hampton bay carriage house II 52" ceiling fan with light assembly (no remote; pull strings for lights and fan, and two position fan switch). I used the wiring from a previously existing ceiling light. I tested the wiring by running them to a grounded plug assembly,... View more questions Search
|