[whozitsdad]

Good morning.

I thought I had this nipped but after two hours and turning the breaker back on; I was disappointed. My question is about the existing wiring.

We wanted to replace a fan in our sons room. It was controlled by a wall switch. The existing wiring from the jbox to the wall switch is:

1xRed
1xBlack
1xWhite

Not complicated :) Here's where I think I messed up. We purchased an additional remote control.

As of now I have the fan w/light & remote wired this way:

From Fan To Remote:

Black to black
Blue to blue
White to white
Green to bare

From Remote to Jbox

Black to black
White to white

And I ignored the Red wire. Of course the fan or light is not working.
Should I have wired the red with the blacks?

TIA
Terry

[whozitsdad]

Good morning.

I thought I had this nipped but after two hours and turning the breaker back on; I was disappointed. My question is about the existing wiring.

We wanted to replace a fan in our sons room. It was controlled by a wall switch. The existing wiring from the jbox to the wall switch is:

1xRed
1xBlack
1xWhite

Not complicated :) Here's where I think I messed up. We purchased an additional remote control.

As of now I have the fan w/light & remote wired this way:

From Fan To Remote:

Black to black
Blue to blue
White to white
Green to bare

From Remote to Jbox

Black to black
white to white

And I ignored the Red wire. Of course the fan or light is not working.
Should I have wired the red with the blacks?

TIA
Terry

And yes, this fan has both a light and fan chains. It is also a Harbor Breeze - 44" sorry for not adding this earlier.

[ceilingfanrepair]

There should be an additional black and white wire either in the ceiling box, or at the wall switch. Which is it?

Ceiling Fan Wiring, Ceiling Fan Wiring Technical Help, Do it Yourself (DIY) - Ceiling Fans N More

[ceilingfanrepair]

I will also ask:

How many wall switches do you have?

Try switching the red and the black from the ceiling, see if it makes a difference.