Ask Experts Questions for FREE Help !
Ask
    brianz's Avatar
    brianz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 13, 2010, 10:34 AM
    How do you shave down Corian countertops?
    I ust bought a new gas stove to replace our old electric stove. We had Corian countertops installed a couple of years ago, and they installed the counter right up against the old stove. We are now trying to fit the new stove, and it is a 'hair' too wide for the existing opening. Can I just sand one edge with a belt sander to give me the room I need?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 13, 2010, 11:23 AM

    If it's only a "hair" I'd use hand sanding,150-22-grit. A belt sander can take a lot away in a hurry and it's hard to maintain a straight line. You might loosen the base cabinets on the other side and try to get some wiggle room.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Aug 13, 2010, 06:06 PM

    Sanding, even for a "hair" is not practical. You won't be able to maintain straight line.

    Best tool is router and straight edge. Can be done with circular saw and straight edge. Neither tool will be able to cut completely to back splash. Final 2" inches can be cut with hacksaw, then sand smooth. Post back for detail instructions and tell us what tool you will use.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the best way to cut corian countertops? [ 7 Answers ]

I am just learning how to work with Corian countertops and I would like to know exactly what I should be doing since I don't have much room for error.

How to repair deep cuts in corian countertops [ 1 Answers ]

I need to repair a deep crack on my corian countertop. Do I need to fill the cracks first and then sand? What kind of compound would be best to use and what kind of sandpaper? Thanks

Corian countertops [ 1 Answers ]

How to cut corian countertops

Countertops, granite, corian [ 1 Answers ]

Looking for some wording to put on a resume for fabricating, installing, layout, etc for granite countertops

Refinishing Corian countertops [ 0 Answers ]

Please advise me on technigue to buff out corian from years of use and occasional scrubbing marks from scour pads. No deep wounds to surface, just dull and scuffed.

View more questions Search