Check out some similar questions!
Can 1000W switch be installed on 20 amp circuit
[ 3 Answers ]
I want to replace a dimmer which that operates overhead incandescent bulbs (each 25 watts) totaling, as I remember 725 watts so I expect to use a 1000 watt dimmer. Here is my issue--the circuit that this switch is on has a 20 AMP breaker. Do I need to find a 20 amp dimmer switch for 1000 watts or...
Generator wiring: new generator gfci breaker tripping
[ 2 Answers ]
Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,...
I have a craftsman generator 3500 watt that's not putting out electrical current
[ 1 Answers ]
On the side it says Craftsman 3500 watt 7.0hp overhead value engine model# 580.327130 serial# 5518449
I require for a Power Plus 5000 Generator 1 generator under following specifications:
[ 1 Answers ]
I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio View more questions Search
Add your answer here.
|