Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tile Shower stall leaking
[ 5 Answers ]
I installed a shower stall a year ago. It has begun to leak. It is on the second floor, and I was able to open the ceiling just below it to see. The water is leaking from around the drain itself. The shower stall pan was installed with a poly sheet.. according to the directions... so that...
Tile shower stall
[ 3 Answers ]
I have a tile shower stall in my home that leaks water. I have removed the 3 inches of cement and tile from the walls and all the rotten boards and the cement floor down to the slab. What is the best way to start over since that apparently did not work.
Framing tile shower stall
[ 1 Answers ]
I am re-framing a shower stall in which I will not be using a pre-fab shower. The stall itself was a 34 x 51 stall. What I am concerned about is the shower door that we will be using. It is 22 1/4" wide. How do I frame the facing wall? I will not be using a pre-fab shower pan either so I need to...
Shower Stall tile floor
[ 1 Answers ]
I converted a standard tub area with a tiled shower stall. The floor of the shower stall is tile. Under the floor tile the guys that did the work put cement board and then laid the tile directly on the cementboard. The grout keeps coming out and some of the tiles are loose. We pried them out,...
Stall shower (tile floor instilation)
[ 9 Answers ]
I am replacing a tile floor in a stall shower. I hve come across two (2) products that are used under the tile. The tile would be cemented to the product used.One product is called HARDIBACKER and the other product is CEMENT BOARD. I am at a lose as too which product is better. Does anyone have... View more questions Search
|