Ask Experts Questions for FREE Help !
Ask
    ReggieD's Avatar
    ReggieD Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 10, 2010, 04:18 PM
    Honeywell lp69071
    I am replacing an old Honeywell LR69071 with a Hunter 44155 and the wires don't match. My Honeywell has:
    X (Blue wire)
    W2/E (White wire)
    R (red wire)
    G (green wire)
    O (orange wire)
    Y (yellow wire)
    and the Hunter has connections for:
    G
    RC
    RH
    Y/O
    W/B
    Y1
    Which wires should connect where?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Aug 10, 2010, 04:27 PM

    Sorry but got to ask
    Is hunter so cheap they don`t give install instructions with their junky tstats

    If its not to late take the hunter back trade it or get your money back
    Get yourself another honeywell
    ReggieD's Avatar
    ReggieD Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 10, 2010, 07:26 PM
    It had instructions the colors/labels just didn't match up. If I may, what is a compatible Honeywell programmable thermastat capable of supporting a Heat Pump?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #4

    Aug 10, 2010, 11:14 PM

    There are so many, Google honeywell thermostats
    Just look for one that for 2h/1c
    ReggieD's Avatar
    ReggieD Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Aug 12, 2010, 12:01 PM
    Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace honeywell t87f with honeywell rth7500d for A/C and Heat [ 9 Answers ]

I'm trying to replace my Honeywell T87F thermostat with a Honeywell RTH7500D. Have tried all combos and can't seem to get it to work. Here's the 4-wire connections to the T87F: Blue Wire --> Y terminal White Wire --> W terminal Red Wire --> R terminal Green Wire --> G terminal Thanks in...

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Install Honeywell RTH230B, Removing Honeywell Q674L [ 2 Answers ]

I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...

Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS [ 4 Answers ]

Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

View more questions Search