 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem gas preasure switch check
The blower fan comes on the draft inducer fan come on... the gas or inghter don't come on... suspect the preasure is bad... how do I ck it?. can I jump the to leads for a second to see if my gas and inghter comes on ? With the inducer motor on... what omes should I have at the switch.?
Thank you for your help... richard |
||||
Check out some similar questions!
My house I no a well and preasure tank now its starting to kick my breaker off and even my main breaker is it wired right what is wrong I don't no where my short is
I want to make sure the heating elements are working or need to be replaced. This is an electric 50 gallon hot water heater (Rheem). This is a total electric home and unfortunately I do not have enough power to go tankless.
I have a 6 year old Rheem Classic 90 Plus Horizontal Gas Furnace (Propane). Pressure switch sticks which causes furnace not to light 1st thing in the morning. When furnace will not start, I remove tube from fan and blow/suck on the tube. I can hear the pressure switch "click" several times and...
What are the proper settings for this particular model. The fan stays on way to long after the heat/fire shut down, which then causes the house to cool down quickly.
I have a Rheem furnace. The furnace won't ignite sometimes, when I press on the lower door panel and wiggle, the safety switch will depress again and the furnace will fire up. Does the safety switch need to be replaced? It seems to be working a little TOO well. I am tired of waking up with it 62...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
