 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
High Efficiency 5000 Heat Pump
I have a High Efficiency 5000 Heat Pump outside unit. The International Comfort Production Fan Coil unit is working just fine . The outside unit isn't working thus not cooling the house.Where are the fuses located on the outside unit so I can check them.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a tempstar 5000 high efficiency furnace and the burners ignite and the heat goes on but it is getting hot and the rollout switch is shutting the furnace off and the fan continues to blow until you reset the switch. Does anyone have any ideas what may be causing this. I have had numerous...
I have about a 1998 tempstar and the air conditioner just quiet. The furnace still circulates the air but it is not cool. The top discharge fan on the unit is not running it still spins if you spin it by hand. There is a electrical hum coming from some where in side the unit can't pin point where...
I have put an 1400 sq ft addition onto an existing home. The addition is well insulated and air tight... will need its own HVAC system. I live outside of Philadelphia, PA. Had been planning to put in a heat pump with an oil furnace as back up for when the outside temp drops and the heat pump...
I have a high efficiency 5000 central air conditioning unit that is not cooling, it is running but the air is not cool. It is model CA5536UKA1 serial LP31232822 Date of unit 3/1993. Could someone tell me what to look for or if it is low on freon.
I am trying to find out if anyone out there would have any idea where I could get a wiring diaghram for a Tempstar Heat pump Called High Efficiency 5000. I believe this is a older model, and there are many out since this one. But the unit is good and I would like to use it. Any suggestions??
View more questions Search
|
