Ask Experts Questions for FREE Help !
Ask
    ladder9's Avatar
    ladder9 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 1, 2010, 11:58 AM
    Plumbing help
    I have a pressure problem. I have a single lever Franke faucet in the kitchen. Pressure from the faucet, both hot and cold, has dropped to the point that it is really annoying. This was not always the case. I disassembled the head and checked the filter. I disconnected the hose from the head at the sink top and checked that filter also. I have not disconnected anything under the sink, although I did open and close the valves. The pressure is fine everywhere else in the house. Any ideas?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Aug 1, 2010, 12:30 PM

    It sounds like you have dirt 9Debris) in your faucet, here is what you need to do, close both hot and cold angle valves under the sink, remove the faucet handle and the cartridge put something on top of the faucet open both hot and cold angle valves for a few seconds one at a time it will flush out the debris out of the faucet, install the cartridge and the handle, good luck.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ppr plumbing vs cpvc plumbing [ 3 Answers ]

Ppr OR cpvc which one is better for residential plumbing

Plumbing [ 0 Answers ]

Toilet bubbling

Correctional grade plumbing how different from commercial plumbing or residential [ 3 Answers ]

Just need a little information about the difference to answer a questioner .


View more questions Search