Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New dimmer switch will not dim light - taking power from 3 way switch
[ 2 Answers ]
New dimmer switch will not dim light - I am trying to hook up a dimmer switch in a electrical box that already contains a three way switch. I am trying to take power from the three way switch to power the new dimmer and light. The way it is hooked up now the new light works but will not dim with...
How to install and power a Ceiling Light from a light switch?
[ 1 Answers ]
I need to install a ceiling light in our bedroom. I have a single light switch and four outlets. One of the outlets is operated by the light switch. I have the following wires coming into the light switch box: three white wires/capped, three copper ground, three black/capped with a fourth pig...
Double light switch has no power to one side
[ 1 Answers ]
I have a double light switch and one side works and the other side will not. I have no made any changes to the wiring in the house. I have checked all the breakers. Does anyone have a suggestion?
Little or no power to light switch
[ 7 Answers ]
Light above kitchen sink stopped working a few days ago. Tried a new bulb, that didn't help. Checked the breaker; it was not tripped, but I cycled off and on it anyway. That didn't help. Loosened fixture and put neon tester on wires. It showed no power. Took switch plate cover off and put...
Adding another switch leg to a 4way switched light
[ 5 Answers ]
OK, the walls were open when I did this so hopefully I got the right wire types in before I closed her up! I have a dining room with 4 entry points and I've put a switch box at each location. The power is fed to this lighting circuit through the room lights junc. Box. I ran a 2 plus ground... View more questions Search
|