Ask Experts Questions for FREE Help !
Ask
    sratliff's Avatar
    sratliff Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 27, 2010, 08:52 PM
    Blower will not run on my Air handler.
    24 volts to T- Stat but blower will not come on. The 5 amp fuse in the air handler is good and the outdoor unit runs and the coils in the air handler get very cold but the blower will not come on. I have jumpered the red and green wire and nothing. I jumper the red and white wire and the heat comes on. Please help.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jul 28, 2010, 05:29 AM

    When you jumper the red and white, did the blower fan come on?
    sratliff's Avatar
    sratliff Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jul 28, 2010, 09:07 AM
    Quote Originally Posted by wmproop View Post
    when you jumper the red and white,,did the blower fan come on?
    Yes it did.
    sratliff's Avatar
    sratliff Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Aug 3, 2010, 08:55 PM

    No thanks to all the experts out there that didn't even attempt to help with this I will answer this for others that had or will have the same problem I did. It was the Control Module in the air handler and it cost $76 to purchase the part and replace myself. It take about 10 minutes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My air handler and outside compressor will not run at the same time [ 3 Answers ]

I have a 2.5 ton Ducane heat pump with electric backup heat. The other day my air handler stopped running (turns out it just tripped a breaker). I reset the breaker and now I can't get the air handler and compressor to run at the same time. The outside unit will run no problems, but the fan inside...

Air handler blower inoperative [ 1 Answers ]

Hello,I have a heil furnace.the blower motor in the air handler is not working.I have checked for power to the motor,and believe I have no power to it.I checked for power from the cutoff switch to the relay and have power to the relay,but no power from the relay to the motor.

Air Handler will not run on heat [ 3 Answers ]

I have a heat pump. This weekend, when I cut the heat on, the outside unit runs but the air handler will not run. It will run on cool. Can any one help?

Air Handler blower won't [ 10 Answers ]

I have a 3 1/2 year new AMANA GUIV070FX40 attic mounted system that is the furnace / air handler for an AMANA RCE42C2A condenser / compressor. The entire system, including new ducting and separate electrical circuits (220 for the compressor / 110 for the air handler) was installed by a credible /...

Air Handler Blower [ 2 Answers ]

One of the 3 brackets that attaches the fan motor to the blower housing on my inside a/c unit has broken, causing the motor to tilt to one side. I pulled the blower and tie-wired the motor to the housing and it seems to be holding. Hopefully this will last a few days. I could adapt a...

View more questions Search