 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Having trouble getting my drain to seal
Put hardi board down, poured a concrete sloped floor, sealed concrete with water proofer (red guard), tiled floor , installed glue on plastic drain and am having trouble getting seal around drain. Any ideas . Have used lexel to try to seal it and am not having any luck.
|
||||
Check out some similar questions!
How do I seal around my shower drain what's the best product to use.
Leaking
The rubber gasket that seals my plastic shower pan to the drain pipe in the floor is leaking. I easily pulled it out and I want to replace it. The name on it appears to say FLORESTONE PROD CO made in China. Number on it is 2 UBC. Size is 3" diameter and 1.5" deep. The thickness of the rubber...
I have just installed a one piece tub/shower unit in my basement. I had to break out about 15 inches of concrete slab from the box that was originally there to accommodate a tub. The hole is completely under the tub which which will be framed into the walls on 3 sides. Should the opening in my slab...
I am replacing the drain in a fiberglass shower due to a leak. Evidently the Drain had worked loose over time. My question is whether to use Plumber's putty or silicone around the lip of the drain? I thought plumber's Putty but I happen to notice on the back label of the container that it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
