Ask Experts Questions for FREE Help !
Ask
    grinder8's Avatar
    grinder8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2010, 12:28 PM
    Socket size and gap setting
    Have a tecumseh engine #6265D need socket size and gap setting for spark plug
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 25, 2010, 04:51 PM

    Hi,
    The three socket sizes for most OPE are 5/8, 3/4 and 13/16"
    Gap is 0.028-0.030"
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Specifications i.e. spark plug gap,tappet gap hot & cold, air gap [ 1 Answers ]

I need these specs for a briggs & stratton Vanguard 16 hp v-twin ohv engine. Model no 303442.Thank u very much Jan

Socket size needed for axle nut [ 1 Answers ]

2003 sunfire. The nut in front of the wheel bearing hub on the front axle. Anyone know what size socket I need? I have to get it off in order to change wheel bearing(hub), and I don't want to buy a bunch of sizes I won't ever use.

12 hp Briggs & Stratton spark plug gap setting [ 2 Answers ]

What is the spark plug gap setting on a 12 hp B&S ? This is an OLD Montgomery Ward PowerKraft rider. Probably late 70's early 80's model.

Air gap coil setting [ 5 Answers ]

My lawnmower has a 16Hp Briggs and Stratton engine. I would like to know the correct setting for the coil. I currently have it set at .010. The lawnmower won't restart after it has been running for awhile. After it cools down it starts okay.

View more questions Search