Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
240V Halogen GU10 Mains on a 120V Circuit ?
[ 5 Answers ]
I recently came across some GE 240V halogen bulbs in England, they are a GU10 type base and MR16 size/shape/type(?) bulb. They are not available in North America yet and having been available for some time in the UK and Europe, it doesn't look promising they will be on the market here anytime...
Ceiling fixture
[ 1 Answers ]
I have a light switch that controls the electrical sockets in the wall. I had an existing electrical box in the ceiling and I put a light up but it would not work. So I put up a ceiling fan thinking it would work because of the pull string. Well nothing is working and I don't know what I should...
New light fixture
[ 1 Answers ]
Changing light fixture in an older home with two conductor wiring. So, black to black, and white to white, but what do I do with the braided bare copper wire on the new fixture? Thanks for any help.
Gas furnace Outside Fixture
[ 5 Answers ]
I'm wondering what options I have for outside supply and discharge? The appliance is a high efficiency York NG furnace (small, less than 60K BTU.). The installation manual shows what could just be PVC elbows. I'm wondering if there are other options. The furnace is intended as backup...
Replace light fixture
[ 2 Answers ]
I am replacing a light fixture and am confused at all the wiring here. I have two red wires connected to ea other and two black wires connected to ea other. Besides that I have two white wires that were used to connect my old fixture which had two clear plastic covered copper wires. My new light... View more questions Search
|