Ask Experts Questions for FREE Help !
Ask
    ch1pp3r's Avatar
    ch1pp3r Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2010, 09:03 AM
    Below ground wiring for 120 volt lights
    My 120V walkway lights use UF cable (not in conduit). Am concerned the cable may be cut during an upcoming replacement of the concrete walkway. What is the proper way to protect any underground splices that may be required?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jul 24, 2010, 09:10 AM

    A proper UF splice kit, like those made by 3M or GB.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Jul 24, 2010, 11:17 AM

    You can also spray paint the entire branch circuit so that the workers will know where the lines are.

    If you ask nicely, you may be able to get Miss Utility (that's what the service is called here in VA.)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What's the difference between a 120 volt and 120/208 volt system? [ 2 Answers ]

We offer our unit in a 120 or 277 volt version. A customer just told me he is using a "120/208" system. What does that mean and will our 120 volt rated product work with it?

81 volt measured at light switch in 120 volt circuit [ 3 Answers ]

The dimmer for a ceiling light/fan combo in the bedroom stopped working. When trying to replace it with an electronic dimmer swich, nothing would work, so I measured voltage from the wires in the box. I had 122V from black to black but 81V from red to black. What would cause such disparity? ...

Wiring 120 volt, 1250 baseboard heater [ 5 Answers ]

House has a 120 volt, q-mark hyd electric baseboard heater ran on 14/2 cable with 2 recepticales of the same feed. 15 amp breaker in panel. Is the OK? Thx

3 phase 208 volt/120 volt .load [ 1 Answers ]

I am trying to hook up a commercial espresso machine which has a 220 line. My existing electrical box is a 3 phase 208 volt/120 volt. Would this be sufficient to handle this?? Thank you

Replacing a 240 volt outlet with a 120 volt oulet [ 1 Answers ]

We've switched to a central air conditioning system and no longer need the 240 volt outlet by the dining room window. The house was built in 1928, updated in 1957, and again a couple of ad hoc times thereafter. The wiring is at times very old, brand new or somewhat old. My guess is that the 240...

View more questions Search