Ask Experts Questions for FREE Help !
Ask
    ashmandps's Avatar
    ashmandps Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2010, 01:06 PM
    Troy built 2 cycle weedeater starts but dies 3 seconds later?
    Ihave a troy built 2 cycle weedeater and it dies after 5 sec or as soon as i hit the throttle if i don't hit the throttel it dies.. i replaced the primer bulb,hoses spark plug,spark arrester screen is clean,gas is new??
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 23, 2010, 02:20 PM

    Hi
    Clean the carb and replace the gaskets/diaphrgms.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

AC starts a cycle stops and loud noise starts from inside Air Handler. [ 1 Answers ]

The central a/c unit worked fine all day and in the evening started a new cycle stopped after about 30 seconds and started making a loud noise inside the air handler for around 90 seconds and tried to start a new cycle without success. I turned the unit off overnight and back on the following...

Troy Built Weedeater [ 1 Answers ]

The pull string broke on my Troy Built Weedeater Model #TB20CS I have it apart built cannot get the red housing off to grt to the string assist mechanism. A silver metal cam is preventing me from doing the job

Troy Built Easy Start Weedeater [ 1 Answers ]

:mad: My Troy Built Easy Start Weedeater will not start. I have changed the spark plug, topped off the fuel, followed all starting directions but my Easy Start Weedeater is not so easy to start. Are there any trouble shooting things I can do? Where can I find a DIY repair manual? Will

1990 Eagle Talon starts, runs 2 seconds, dies. [ 3 Answers ]

My 1990 Eagle Talon turbo AWD starts, runs about 2 seconds, then dies. It just started doing this when I took the ECM out from under the dash to look at the wiring. Sometimes by wiggling the wires around I can get it to run normally (not die). Then while it is running, if I wiggle the wires...

View more questions Search