 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tile near my air handler is unusually cold. We have ground returns. Is this normal?
Just had our air conditioning unit serviced last week and since then we have noticed that the tile just outside of the air handler closet is extremely cold when unit is running. What could be the cause of this? We do have ground returns in this home.
|
||||
Check out some similar questions!
I have a payne air handler(14 year old)... the 5 amp fuse is blown. I replace the fuse and it blew again... I noticed that the 220 ground is corroded and should be cleaned/replaced. Am I at the source of the problem or are the other items to look at be replacing the fuse? Currently nothing...
I noticed the floor was very cold at the airhandler closet. A coils are clean in airhandler and I replaced the filter.My outside compressor just keeps running without stopping.Airhandler seems to be cycling on and off like it should.
Cold air returns are in the ceiling and cold air is coming down into the house from the attic through the cold air returns. I have 3 return airs on the one side of the house one in each bedroom and on in the hallway. This side of the house is at least 10 degrees colder and the furnace runs longs...
My cold air returns ar located main floor on the floor below is insulated garage where furnace is located. New home however is it normal to feel cold air blow up through the returns whwn its windy out?
We had a brand new home built by a local contractor and they did not put any cold air return vents in the basement? Is this OK?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
