Ask Experts Questions for FREE Help !
Ask
    runcie67's Avatar
    runcie67 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2010, 02:47 AM
    What are the measurements of a Parkside 40/3 chain sprocket for chainsaw
    What number of legs and diameter or circumferance of sprocket

Check out some similar questions!

How to put the chain on the sprocket [ 2 Answers ]

On my overhead Garage door opener, the chain has come out of the sprocket. I can see how to put it back, but not able to pull it with my hands to put it over it, does anyone know of any tools which will help me do that. Or is there a trick in doing that. Thanks

Garage door opener idler sprocket [ 2 Answers ]

Hi, I have a Stanley Professional Model 7200, Serial # 084143, 1/3 Hp Garage Door Opener with a worn and damaged plastic idler chain sprocket.:mad: I have not been able to find a replacement.:confused: I am looking for the Plastic or metal Chain Sprocket that is about 2 ¼ inches in diameter,...

Sprocket change for feet per min. [ 1 Answers ]

I have a drive roll that needs to turn 500Ftm min.. It now turns at 420Ft.min. The drive shaft FPM is 61 The drive shaft RPM is 120 The drive sprocket has 24 tooth The driven shaft FPM is 120 The driven shaft RPM is 245 The driven sprocket is a 10 tooth :confused:

Sharpening a chainsaw chain [ 1 Answers ]

Hi everyone... I just bought an electric chain sharpener for my 18'' Poulan Pro. I felt asthough if I sharpened 2 chains the tool is paid for instead of buying a new chain every time it gets dull. My problem is that it tells you all about the product but not any technigue on how to sharpen the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.