Willi have to run a neurtal wire to 208 -3 phaze to get 220 volt eqiptment

RICHARDLUFF Posts: 1, Reputation: 1

New Member

Jul 16, 2010, 10:53 AM

Willi have to run a neurtal wire to 208 -3 phaze to get 220 volt eqiptment

I have a 208 3 phase braker pannle I want to get single phase 220 plasma
Unit to work will I have to run nutral wire for ti to work.

Check out some similar questions!

Older 220 volt wire - I have an old (1970) in floor 220 volt finned electric radiator [ 1 Answers ]

- I have an old (1970) in-floor 220 volt finned, Taylor company, electric radiant heater. The 1 ft cord between two of the power units to the fins cracked and shorted out the circuit. Cord is only marked HPN. I believe it is 16/2 rated for 220 volts and 2000 or 2400 watts. I say that because that...

What type of plug will I need to wire my air compressor 208-240 volt 15 amp motor [ 2 Answers ]

I just bought a 60 gallon air compressor and it didn't come with a plug. I need to know what type of plug I'm going to need to wire to it. It just has 2 connections (1 black 1 white). What type of plug do I buy to hook up, and where can I get one? The motor is 208-240 volts 15 amps.

Can you run a 208 volt heating panel on 240 volt electrical supply [ 1 Answers ]

I have a baseboard electric heater that is 208 volts. My power supply is 240 volts. What will happen if I try to run m y 240 volt electrical supply to my 208 volt electric baseboard heater?

Want a convert 220 Volt AC to 110 Volt AC to run a stream Iron [ 3 Answers ]

I have the AC supply of 220Volt. But have received a stream iron which operates on 110 Volt AC. Can somebody suggest me how I can use this iron? If possible please let me know. Thanks with warm regards, Kamal Bhasin

View more questions Search

Check out some similar questions!

Add your answer here.