 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
this is my back-up rider to my yard machine
I already have a question out there on my yard machine that took off by itself,this is about my back-up it is a sears LT/10e cast iron engine block solid state ignition not the greatest looking machine but seemed to run fine until I was cutting grass and it seemed to lose power at first I thought it was just getting hot,so I let it cool down but it still ran like crap it seems to lose power when I engage the mower deck and also when I put it in gear. Runs fine when nothing is engaged,I pulled the carb and found some old gunk in it I cleaned it up and put it back together but I'm not sure on the setting on the needle values one on the bottom of the float and one in the middle of the carb,also has one on the top of carb,is it something with the govener? No power any ideas? Thanks I'm out of mowers and grass is getting high. Don
|
||||
|
||||
|
Hi, Here is a link to the Tecumseh cast iron engine manual: Poulan Pro - Poulan - Weed Eater - McCulloch - User Manuals Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I hit a belt off a steel belted tire while cutting grass near the road. It was hidden beneath the tall grass. The engine almost died, but picked up again and began smoking. When accellerating, it makes a sound that I used to get when I used low octane gasoline in my car which needed high test. The...
I have a 17.5 hp mtd yard machine. Can anyone tell me how to take the mowing deck off so I can change the blades?
OK. Normally, I would continue to tinker if it was one of my cars, but I have temporarily been outmatched. (HA) I have a YardMachine mower that has finally decided to stop and not start or run. It started three days ago and ran for 5 minutes. This was the first start of the year. It seemed to take...
I would like your advice as to the next step I should take to get this mower going. It's a MTD 600 series rider from 2001 with a 13 HP Briggs (28T700). This machine ran a month ago but now it won't. The starter will engage the engine and it will "run" while the starter is engaged, but the engine...
View more questions Search
|
