Ask Experts Questions for FREE Help !
Ask
    pisces756's Avatar
    pisces756 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2010, 01:34 PM
    Whirlpool washer will wash, spin, empty, won't go to rinse cycle
    Whirlpool washer will fill with water, wash, empty water, spin but will not go to the rinse cylcle.. it just sits and hums. Any ideas?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jul 12, 2010, 02:03 PM

    Is you washer still full of water? Model number would be helpful. Good luck
    applianceman's Avatar
    applianceman Posts: 30, Reputation: 2
    Junior Member
    		  
    #3

    Jul 13, 2010, 10:14 AM
    Where is the hum coming from? Is it coming from the water valve? This will be where the hoses connect. Most rinse cycles use cold water only. There could be a problem with the cold water supply or the water valve itself "IF" the hum is coming form the valve.
    wmckemey's Avatar
    wmckemey Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Nov 26, 2012, 05:06 PM
    I have an Hot Point washer, like 1980ish. Anyway, my washer wouldn't go into rinse. I checked the cold water handle, and sure enough, someone had turned it wayyyy down. I adjusted it and its working fine now...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The tub on my kenmore elite he3 will not spin for the wash, rinse or spin cycle. [ 1 Answers ]

The tub on my kenmore elite HE3 will not spin for the wash, rinse or spin cycles. The motor is making the usual sounds like it's supposed to but the tub just does not budge.

View more questions Search