Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need bushings for a Unico Garden Tiller
[ 1 Answers ]
I need 2 flanged bushings for the tine shaft on a Unico Model #5055-3 WITH serial # B. The measurments of the bushings are as follows. 1.25" inside shaft diameter, 1.75" outside diameter, 2" flange diameter overall length of bushings are 1.25". Where can I find these parts and possibly a parts...
Trying to find age of garden tiller
[ 4 Answers ]
I recently acquired a used Lowe's brand garden tiller, manufactured by MTD. I have the model and serial number, and just wondered if there is any way I can find out the year it was made?
Garden tiller won't run.
[ 6 Answers ]
Bought a Mantis tiller and loved it, started every time and did a good job. Used it approx. 2 yrs. Got it out this year, gased it up and it started within 2 or 3 pulls of the rope. When I tried to engage the tines the tiller would stop but would start right up again but kept stopping when I tried...
MTD Garden Tiller
[ 1 Answers ]
[FO MTD Garden Tiller - Model #317385-500 How do you put the two drive belts on? Is it possible to get a manual for that model?
MTD Garden Tiller
[ 1 Answers ]
2005 MTD, 7 hp, garden tiller will not shift out of forward gear. Why? View more questions Search
|