Ask Experts Questions for FREE Help !
Ask
    woody8's Avatar
    woody8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2010, 07:45 PM
    Is Gy20709 the correct fuel filter part number for John Deere L100
    When I start up my L100 it runs fine for a few minutes and then starts to cut in and out. It runs the whole time but every few minutes the engine starts to die but then revs back up. I'm guessing the fuel filter is clogging and needs to be replaced. Am I on the right track?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 11, 2010, 08:48 AM

    Hi,
    The parts breakdown calls for the AM116304 though it may not look like the original supplied by Briggs.
    Good guess at the problem!
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

L100 john deere mower [ 3 Answers ]

Checked battery terminals and charge of battery... mower was fine last week when parked now it won't start, also checked 20 amp fuse... are there any other fuses?

Where is the oil filter on a john deere L100? [ 2 Answers ]

Maintenance question

John deere part number AM101716 [ 0 Answers ]

Is it possible to find a discount price on a steering shaft for a SRX 75 john deere lawn mower part number AM101716 and where

John deere lawn mowers lt160 acts like its not getting fuel, changed filter and gas [ 0 Answers ]

John deere lti60 acts like it is not getting fuel. Will not run wide open changed fuel filter, gas,plug

Have a john deere L100 no start [ 2 Answers ]

John deere L100,NO START,took off starterand had it checked and its fine. I HAVE 12 VOLTS AT THE BATTERYand 12 volts going into the senolid but no volt coming out of the other side of the senolid and no volts at the starter.CAN I jump the starter senolid like the old FORDS or will it short the...

View more questions Search