Ask Experts Questions for FREE Help !
Ask
    yael01's Avatar
    yael01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2010, 10:32 PM
    Baro high circuit
    I have a acura 1997 cl 2.2 I'm getting this code on my scanner p1108 baro high circuit
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Jul 11, 2010, 10:00 AM

    Here's where things get weird.
    On your car, that code more often means the Powertrain Control Module (PCM) has an internal fault. In other words, the PCM has failed and will need replaced with another.

    This is the fault trace procedure:

    Name: 1a.bmp Views: 50 Size: 263.6 KB

    Have you done the reset on your PCM?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

High red blood cell count, hair loss, high RDW -- cancer? [ 3 Answers ]

Hi, Four months ago my mom began losing a lot of hair and it didn't stop and doesn't look like it's growing back in. Also, I've noticed that in her face it seems to have aged 5 years in the last 4 months. That could be just normal aging, but it seems like it should not have happened that fast,...

Circuit Breaker trips because two bathrooms and master bedroom on same circuit [ 6 Answers ]

Some electrician committed a blunder in my opinion about 17 years ago. The master bedroom and two full bathrooms are all on the same circuit. If two hair dryers are used at the same time, it will trip the breaker every time. In figuring out what amperage would be required for two hair dryers and...

Can circuit work well if we connect 12A load to 20A circuit? [ 5 Answers ]

Hello: I have several equipment which are around 12A. I just can connect them to 20A circuit. But I am not sure if circuit will trip well under overload and short circuit. I know 15A is perfect.But,I don't have 15A circuit Thanks for everybody.

Baro absolute pressure sensor [ 2 Answers ]

My honda civic 1990 si is showing code 13 on the ecu.I was wondering where is the absolute pressure sensor located and what does it look like.I also just recently failrd aircare could this be my problem.

Outside GFI circuit - 15amp outlet on 20amp circuit [ 1 Answers ]

I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...

View more questions Search