Ask Experts Questions for FREE Help !
Ask
    coldass's Avatar
    coldass Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 10, 2010, 07:52 AM
    Is there a testing tool to find out the l.e.d codes for a carrier furnace heater?
    Just a quick question.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Jul 10, 2010, 08:26 AM

    Model #?

    Blink codes should be on the inside door panel.

    On same Infinity Carrier AC units, you can connect a PC with appropriate software to read the faults. Infinity stats have this info in the Installer's menu's.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier furnace error codes [ 7 Answers ]

We have a Carrier 58PAV and the Red LED light is on. Furnace makes a high pitch noise when starting up. We are having trouble understanding the directions provided in the manual to do the component test. Instruction manual says to "To initiate the component test sequence shut OFF the room...

Carrier furnace heat works, ac comp. Goes on blower does not come on. No fault codes [ 0 Answers ]

I have a carrier furance the heat works, the ac comp. goes on when I turn the air on but the blower does not come on. There are no fault codes.I can take out the thermostat jump the wires and switch off sw-4 on the control board to turn on what they call emergency heat. Then the blower comes on. I...

Carrier furnace trouble codes [ 2 Answers ]

Carrier mvp 080 14 series 140 blower did not work replaced circuit board and blower module blower now works but led flashs 12 "blower calibration lockout"

Carrier trouble codes [ 1 Answers ]

Hi I am having an issue with a Carrier furnace model #58STA90. It will not light and it gives a code of three short flashing led lights and then one long. I checked the igniter and did not see any cracks across it.


View more questions Search