York electric heat code 4 why I'm I getting too much power to the heat element

tommelton Posts: 1, Reputation: 1

New Member

Jul 7, 2010, 02:00 PM

York electric heat code 4 why I'm I getting too much power to the heat element

Just a quick question.

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jul 8, 2010, 01:44 AM

Have you measured the voltage available with a meter?

Add your answer here.

Check out some similar questions!

2008 4 ton Goodman heat pump doesn't switch into electric strip heat? [ 18 Answers ]

OK even when its 17*F out I can still here it running at night. So is this a problem? I mean it runs non stop.

Coleman electric furnace/heat pump. When elec heat comes on, it will not shut off. [ 1 Answers ]

Last week when I got up for work I noticed the house warmer than normal. I found the electric heat strips still energized. Tstat was set for 70 house was 74. I do hvac work but deal with air handlers, chillers and small boilers, only residential when its mine. Anyway, I asked the guy at Johnstone...

Changing electric heat to gas heat, live in tx. [ 2 Answers ]

I have just the opposite question,my electric bill ran up to $930.00 in jan. I'm wondering if I should be looking into converting it to gas. I do have gas for my fireplace, I'm not even sure if I can convert. Can I convert and is gas cheaper? I live in TX, can't afford 1k a month. Thanks for...

Advantages of converting from propane heat to electric heat for home use [ 1 Answers ]

When is it an advantage to convert from propane heat to electric heat in a residential home? Also could you give me a rough idea of what it costs to make this transition? Thank you. :confused: