Ask Experts Questions for FREE Help !
Ask
    NOGOGLO's Avatar
    NOGOGLO Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2010, 07:48 AM
    Which is the best paint for aluminum outdoor
    Just a quick question.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 5, 2010, 08:11 AM

    Can't tell the best paint, Maybe Powdercoat.
    Zinc Chromate is an Excellent primer for Aluminum.
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #3

    Jul 5, 2010, 07:53 PM

    Outdoor aluminum what? I use Rustoleum on aluminum and have gotten excellent results. I usually use 2 coats.
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #4

    Jul 5, 2010, 09:30 PM
    Hi, NOGOGLO!

    Yes. Aluminum what, please? It might make a difference as to what brand or type of paint is used depending on the size and use of that which is to be painted.

    Thanks!
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #5

    Jul 5, 2010, 09:41 PM

    I've done an Aluminum storm door with laquer a couple of times with very good results.
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #6

    Jul 5, 2010, 10:00 PM
    Was the door exposed to the sun on a regular basis, KISS?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #7

    Jul 5, 2010, 10:02 PM

    Yes, a front exterior door that get a LOT of sun. Might have painted it every 10-15 years.
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #8

    Jul 5, 2010, 10:03 PM
    And, you did it with a lacquer based paint?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #9

    Jul 5, 2010, 10:25 PM

    Yep, Rustoleum spray laquer in cans.

    Took door off and disassembled it. To paint.

    I've air brushed laquer, but don't have spray equipment for larger areas.

    I definitely have a lot of stuff could powder coat, but don't have sandblaster, powdercoat gun and IR lamps.

    Chairs, awnings and gutters and iron railings to name a few.
    It probably would be cheaper to buy.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there any reason to paint the ceiling with paint when the white primer looks good? [ 4 Answers ]

I just finished putting up new drywall and sprayed a white primer on the ceiling - 2 coats. The ceiling looks good and I'm trying to decide if I really need to paint the ceiling now or can I just leave the primer as it is?

If 8.1g of aluminum metal occupies 3.0mL, what is the density of aluminum? [ 1 Answers ]

If 8.1g of aluminum metal occupies 3.0mL, what is the density of aluminum?

I am a girl and have to figure out what paint and how to paint my barn? [ 4 Answers ]

Ok so now that I have your attention.. I have a very old existing barn with not much paint on it. Who knows when and with what type of paint was used it is so weathered. I think I can just paint over it. In its condition I would have to sand it. The paint is not flaking it is just very weathered...

How do I re-paint an old aluminum fence (not chain link)? [ 1 Answers ]

I have a black aluminum pool fence that is about ten years old. It is looking very tired, faded and worn. Rather than spend the money to replace the entire fence I would like to repaint it. I have contacted the manufacturer (elite) and they informed me that they only sell touch up paint and that no...

What prep work is needed to change from oilbase paint to waterbase paint? [ 1 Answers ]

Is there anything I need to do to prep my kitchen from oilbase paint to water base paint ?

View more questions Search