Ask Experts Questions for FREE Help !
Ask
    frostyrecordz's Avatar
    frostyrecordz Posts: 16, Reputation: 1
    New Member
    		  
    #1

    Jun 24, 2010, 05:38 AM
    Why does nothing show on my screen
    I have just built a computer and put everyhting together about nothing shows on the monitor.
    I've changed the graphics card many times and have even brought a new motherboard and tries endlessly with that, but nothing works.
    Is they something I'm missing?
    I've just brought 2 new motherboards on the internet and connected them up, yet having the same problem again, does not show nothing on the screen, not even a bios.
    I've chaged my monitors and still the same problem, yet the monitors are working perfectly with other machines.
    What am I missing?
    Please help?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 24, 2010, 05:46 AM

    Look at the ends of your monitor cable for a bent pin(s).
    frostyrecordz's Avatar
    frostyrecordz Posts: 16, Reputation: 1
    New Member
    		  
    #3

    Jun 24, 2010, 10:35 AM
    Comment on Stratmando's post
    Hi there.
    I've had a look at all the ends of the pins, they are all fine.
    The monitor plugs are OK as they pick up other computers.
    I've had this problem with 3 computers now, including 2 new motherboards with onbaord graphics.
    I've even put new graphi
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Jun 24, 2010, 03:38 PM

    I would say remove all power reseat everything in your computer, all boards and memory.
    I'm sure its fustrating.
    You seem determined, tahts good, hopefully others will post possible causes/solutions.
    Good Luck
    Jaymzkerten's Avatar
    Jaymzkerten Posts: 11, Reputation: 3
    New Member
    		  
    #5

    Jul 2, 2010, 10:51 AM
    Does the computer make any POST beeps when you power it on? If it makes anything other than 1 beep that usually means there is some sort of error.

    Also does the video card have a port to plug something into the side of it? If so you need to make sure that the power supply has a plug for it, otherwise it won't be getting enough power to power on.
    frostyrecordz's Avatar
    frostyrecordz Posts: 16, Reputation: 1
    New Member
    		  
    #6

    Jul 5, 2010, 09:58 AM
    Hi there
    Thank you for all your help.

    I've tried everything, I think the possible problem maybe that I have been using a hp p4sd motherboard.
    I have 2 new motherbaords, quiet new as well, recently brought one of eBay and taken one from anither machine.
    They both don't work for some reason. It powers on, the beeps are OK, it just beeps the once.
    But for the life of me I don't know why this happening.

    Ive even tried putting the motherboard back into the original casing for the computer as its got an extra 1 or 2 wires that connect on from the power supply that's in the machine. Don't know is that is the reason but neither did the motherboards work in there.

    Am I missing something?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #7

    Jul 5, 2010, 10:06 AM

    I can't think of anything.
    http://en.kioskea.net/forum/affich-2...-in-monitorook here:

    And:
    No display on monitor.

    Then Google no display
    Good Luck.
    You tried different cables?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Emerson 20in LCD Flat Screen. Model No. EWL20S5C with split screen [ 5 Answers ]

Hello,I have an eight month old Emerson 20in LCD Flat Screen. Model No. EWL20S5C My sound is great. My picture is distorted. Seems it has a divided screen. With little movement of the actual picture. Colors are way off. And none of the controls work except for channel up and down work, but very...

How soon does pot show up in a follicle screen? [ 5 Answers ]

I smoked it once a week ago. I have a hair drug test coming up in the next month. Will it be detected?

Will one Lorcet, taken ten days ago, show up on a follicle screen? [ 2 Answers ]

Situation: Ten days ago, my boyfriend had a headache for three days that he couldn't get rid of. He took a lorcet that was prescribed to me almost three years ago (out of a prescription of 20, there are still 16 in the bottle). Yesterday, while on a secondary interview, he was advised he'd...

Having a problem moving my address bar from bottom of screen to top of screen [ 11 Answers ]

Hello everyone, I can't seem to bring up an address bar at the top of the screen because when I right click at the top of the page, the options are not lit up. I could only bring up an address bar at the bottom. Since it gets in the way at the bottom, I would like to know if anyone can help me...

View more questions Search