Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane heat pump troubleshooting
[ 1 Answers ]
My compressor will run for a few seconds then shut off the tech reported the pressure was near 700 lbs and recently he replaced the pressure for this same problem he reported the switch was bad due to contamination in the system blocking the switch fom working he said I either need to replce the...
Heat pump troubleshooting trane frayed wires
[ 1 Answers ]
I had a squirrel strip off the insulation on most of the wires connecting the thermostat to the outside unit. I separated all to prevent shorts and the heat pump still won't come on. I checked breakers in the box and found one in the inside unit. None were tripped. Anything else I should look...
What trane programmable thermostat can I use with my XL13I trane heat pump
[ 1 Answers ]
Can I use the 800 series thermostat with my XL13i trane heat pump?
How to wire a trane 900 series thermostat to a trane XL13i heat pump
[ 1 Answers ]
How to wire a trane 900 series thermostat to a five wire XL13i heat pump system.
Trane XL20i heat pump requires Trane 900 series thermostat?
[ 2 Answers ]
Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used. View more questions Search
|