| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
 [ 4 Answers ]
 I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y... 
Replacing intertherm with honeywell rth7500d
 [ 3 Answers ]
 I have a nordyne/intertherm thermostat on heat pump hvac system. Has seven wires: E- emerg heat W- aux heat O- RVS Cooling G- Fan R- 24 Vac hot C- 24 VAC Comm ... 
Honeywell RTH7500D thermostat install dilemma
 [ 0 Answers ]
 I am trying to replace my old Lennox thermostat with a new Honeywell RTH7500D. I have a heat pump. The Lennox 51h4601 wiring desginations are as follows: T - Ambient Sensor L - Service light O- reversing Valve Y1- First stage compressor E- Emergency heat, no wire is connected C- Common R-... 
Replacing carrier thermostat with honeywell
 [ 5 Answers ]
 I'm replacing my Carrier TSTATCCPQ501 thermostat with a Honeywell rth230b but I'm a little confused on the wiring. The wires I'm given are blue, white, yellow, green and red. With the Carrier, it's marked b and r for the red and blue, but with the Honeywell, it's Rh and Rc. I can't tell which is... 
WIRING DILEMA , Honeywell Thermostat RTH7500D Programmable
 [ 2 Answers ]
 Hello, I want to replace an Old thermostat mechanical type WHITE-RODGERS 1F56W-361model with the high tech Honeywell RTH7500D Programmable,. read carefully the Owner's Guide but my situation doesn't fit any description. I have 6 wires on the old thermostat to terminals: -RG(1wire) -RH(2... View more questions Search 
 |