Ask Experts Questions for FREE Help !
Ask
    windstars's Avatar
    windstars Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 1, 2010, 08:09 AM
    Windstar trsnmission filter O ring removal
    After remove the old filter, the old O-ring stuck in.
    Should I break it down in order to put in a new filter?
    Or remove the O-ring from the new filter?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 1, 2010, 08:13 AM

    Use a large, flat blade screwdriver and carefully pry it out of the transmission housing, being careful not to score the walls. Then, install new transmission filter and O-ring, after coating the O-ring with ATF. The blade of the screwdriver will bite into the inside of the O-ring; the fulcrum is the edge of the housing.
    windstars's Avatar
    windstars Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 1, 2010, 06:56 PM
    Thank you TxGreaseMonkey
    I removed the O ring from the new filter. Quick and easy. Hope it will work for me.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay fan removal - can't remove the canopy ring [ 2 Answers ]

I see lots of questions about removing the canopy ring. Most say to turn the ring counterclockwise to remove. When I do that, it only loosens slightly, but won't remove. I've tried twisting, pushing up/down, still it only loosens slightly. Any suggestions?

No dial tone when trying to ring out, won't let people ring in! [ 6 Answers ]

I was on the phone when the phone call was cut off and I could only hear a quiet buzzing sound, after this I tried to call my friend back and every time I pick up the phone I can only hear the buzzing sound! I asked my friend to call me instead, she said that it was ringing on her end, but my...

Removal of ceiling fan canapy ring [ 2 Answers ]

How do I remove the canapy ring, I twist it but it only moves a very little? It is a hampton bay with no screw apparent

Filter location / removal [ 1 Answers ]

I have a York heating air conditionong system , a/c stopped working I am told there is a filter in my furnace unit that if dirty will cause ac not to operate. York model # m3uf044sa How do I get filter out of furnace to clean it ? Thanks

What's the difference between a comitment ring and an engagement ring? [ 13 Answers ]

Can someone please help me here I was wondering what's the difference between a commitment ring and an engagement ring?

View more questions Search