Ask Experts Questions for FREE Help !
Ask
    jbare64's Avatar
    jbare64 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 30, 2010, 03:48 PM
    Reliance 30216A transfer switch vs a GenTran 30216V
    What is the difference between these two generator transfer switches other than cost ($240 vs $200)?
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    Jun 30, 2010, 05:20 PM
    I know the Reliance can be hard wired or used with the plug. The GenTran has the plug pre-installed. And you can get either of them for less than $175

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical transfer switch [ 4 Answers ]

I have a 2 pole 60 amp Manuel transfer switch. I am installing a 2 pole 60 amp breaker in my main panel with #6 wire ( 2 hots and a neutral plus ground) to feed the 2 pole 60 amp transfer switch. From the main lugs on the 2 pole 60 amp transfer switch I am feeding a sub panel with #6 wire ( 2...

Transfer Switch [ 2 Answers ]

How do I wire a tranfur switch for a portable 6300 watt generator coming from the Main panal to the tran tranfur switch do I need a subpanal to also can you give me A diagram also For this I would bring power from a 60 amp breaker in main panal I only want to run afew things...

Generator transfer switch [ 1 Answers ]

How difficult is it to install a generator transfer switch? It's pre-wired, doesn't look too Difficult. Is there anything I should look out for? The only thing I'm not sure of is it comes with two 15-amp 1-pole breakers, two 20-amp 1-pole breakers, and one 2-pole 20 amp breaker. How do I tell the...

Transfer Switch [ 3 Answers ]

Ok I am looking to add a transfer switch so I can run my generator when the power is out. I have always been told that my transfer switch needs to be rated higher then my generator's output. The problem is my generator has two output rating stated. In other words, a constance rating of 5,550 kw...

Transfer switch [ 6 Answers ]

I’ve recently purchased a Guardian 13kw standby generator with a transfer switch and load center panel. I have a couple of questions 1. The transfer panel had a total of 205 amps through 12 various breakers in it, can I replace some of them as long as I don’t go over the original 205 amps and use...


View more questions Search