Ask Experts Questions for FREE Help !
Ask
    TheLittleOne's Avatar
    TheLittleOne Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2010, 11:59 AM
    Engine Pulley
    I have a riding lawn mower that needs a new engine pulley. I took the bolt out of the bottom but I am still having issues getting it off. Any suggestions?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 25, 2010, 12:24 PM

    A pulley puller. Put bolt partway in. clamp puller around pulley and turn screw of puller. No other way.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing craftsman engine pulley [ 4 Answers ]

Can anyone give me some pointers on replacing the engine pulley on my craftsman riding lawn mower which is about 11 yrs. Old. The bolt in the center of the pulley needs to be removed to replace the pulley but the entire pulley turns when I try to loosen the bolt. Any suggestions?

Changing Engine Pulley? [ 5 Answers ]

I have Sears riding Lawn Mower with Brides & Stratton engine and it's engine pulley broke off. There are two pulleys attached to this shaft. How to remove and replace this shaft? It's attached to the engine. Thanks.

Removing MTD engine pulley [ 3 Answers ]

I need to replace my drive belt but cannot get the pulley off, motor spins? Any suggestions? Also it is reverse thread correct? Thank You

MTD Engine Pulley replacement [ 2 Answers ]

I've got an old ('89) MTD lawn tractor with a 12hp B&S engine, 38" cut. The engine drive pulley has come apart and needs to be replaced. I can find replacements, but my question is how does the old pulley come off? It seems like there is a nut holding it on. Normal or reverse threaded? How do I...

View more questions Search