Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sink Drains
[ 1 Answers ]
I am a volunteer at a teen center and want to plumb up a double sink. The drains have to meet commercial code. Please let me know what type of fitting I need to use (traps, tees,etc) Copper is required by our code. Yes, I can solder. Thanks!
Smelly drains
[ 2 Answers ]
I have smelly drains! It is only in the cooler weather do they smell. It comes up from the shower drain, toilet, and the kitchen drain. It smells like strong gases coming from all the drain openings. What could be the cause and why is it only smelly in the cooler weather? I hate to have...
Smelly drains
[ 3 Answers ]
Does the stack pipe need to go straight up? Mine (pvc) has a curve in it, a 90 degree pipe that takes the stack approx. 1 ft over and up (just below the roof) to avoid a beam. The ceiling height in this utility room is about 8 ft. I have a very small 1 floor house and all my plumbing action is...
One toilet drains into another
[ 1 Answers ]
We live in a house with a toilet upstairs and another down when we flush the upstairs one the downstairs one overflows can anyone please help me with this problem?
Drains
[ 2 Answers ]
Do they make 1 1/4 inch tees to connect double sinks to a single drain? If not what can you do to connect? View more questions Search
|