Ask Experts Questions for FREE Help !
Ask
    ihcpearl's Avatar
    ihcpearl Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 28, 2006, 07:45 AM
    Find mfg. of lawn tractor
    I have a older lawn tractor that is tagged BRADFORD MONTICARLO 836. I'm trying to find out who and when built these and distributed them. I've been searching the web and can not find anything on these old machines. Model 5285-2800yd4 and serial no. 6274567 is the other info. I've found on the tractor. Any help or web site info. Would be great. Thanks joe
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
     
    #2

    Jan 1, 2007, 07:01 AM
    I can recommend this site. A lot of knowledge here. Antique Tractors - Yesterday's Tractors : Antique Tractor Headquarters


    Good Luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD Lawn Tractor [ 8 Answers ]

Greetings, I have a 1991 MTD lawn tractor 18hp w/46" deck, 6 speed, low and high range. Over the past year 1st through 4th won't move tractor forward and I have to use position 5 or 6. Is this a problem with the trans or a drive belt problem? The only belts that have ever been changed are the deck...

Troybuilt Lawn Tractor [ 6 Answers ]

Mower Runs Fine, Just When I Engage Blades, Will Run For A Min And Then It Will Disengage Blades, What Is The Problem

Mtd lawn tractor [ 6 Answers ]

I recently bought a used mtd lawn tractor, 38" deck, 7 speed manual ,12 hp I/c briggs engine. The tractor needs a new transmission belt. Because I don't have an owners manual or parts list, I don't know which belt to order. Does anyone know what belt I need?

Mtd lawn tractor [ 3 Answers ]

I have an MTD lawn tractor seems to act like it is sliping if forward gear I have repaced the belt. Does not do this in reverse. Could it be the transmission is that rebuildable?

Tractor lawn mower [ 2 Answers ]

Hi I have a Wizard lawn mower with a Briggs & Stratton engine that was ran with low oil I don't know much about engines but when I stripped it the piston arm has sheared at the end I can't see any other damage so my problem is I need to replace the piston but I can't see any no on the piston all I...


View more questions Search