 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
ford 6.0l shut down hot, no restart
04 F350 4X4 6.0l diesel. Pulling a trailer up hill running fine. Got to the top and shut down would restart and run for about 5 seconds and shut down again. Ck with scanner and got code for crank/cam sensor. Changed and tried again, same. Tried a computer from a running truck, same. Checked wiring to and under valve cover, OK codes come back after clearing for cam/crank sensor.
|
||||
|
|
Check out some similar questions!
My 98 honda civic ex just shut off while I was sitting at a light and won't restart... someone said the ignition coil went out.. is this true?
I was driving my 2001 power stroke diesel it shut down and will not restart. A computer check shows a code of high volume oil pump lower. There is no fire from the wiring harness going to the sensors to the oil pump should there fire.
I think I may have a virus and when I downloaded Adaware the computer needs to be restarted in order to load properly. But for some reason when I go to shut down or restart the computer the icons on the desktop will be gone but the background picture remains and it will not shut down completely. I...
I have a 17 HP Briggs & Stratton on a Murray riding mower. It starts and runs fine until it gets hot and I shut it off. It will not restart until it cools.
My 12.5 HP vertical shaft B&S is running a Craftsman lawn tractor and is approximately 17 years old. I performed my usual spring maintenance on my push mower and tractor which is change the oil, replace the gas filter, air filter, replace spark plug,inspect the belts, and run each for 4-5 minutes...
View more questions Search
| Question Tools | Search this Question |
|
