Ask Experts Questions for FREE Help !
Ask
    cal0164's Avatar
    cal0164 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2010, 08:18 AM
    Uc7083t remote led red light stays on
    The red LED light on the remote for my ceiling fan stays on. I thought it was a low battery so I changed battery but LED light is still on. Remote is for a Hampton Bay ceiling fan. The model # on remote is UC7083T.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 21, 2010, 10:52 PM

    Button is probably stuck. See if you can undo it. You may need to open the remote. Worst case scenario, order a new remote from the manufacturer.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Park Hill Type 2 - Remote LED light on, but Light/Fan not working? [ 2 Answers ]

Remote Control LED light is on, but the Hunter Park Hill Type 2 Model 20578 Light or Fan will not work... why?

Red Led Light constantly flashing on my 3Ton Payne Gas Furnace [ 0 Answers ]

Have a 3ton Payne Gas frunace... the Ignitor glows and the Gas Valve opens,the burners turn on,but after about a minute,the flame goes out and the Induced Draft motor shuts off.Only the blower stays running... the red led light keeps flashing... what is wrong? I replaced the ignitor,but the problem...

Red led light for a concord 80 + [ 1 Answers ]

What dose 3 blinks on red led light for a concord 80 + furance mean

Bryant Furnace RED LED light remaining on [ 6 Answers ]

On Thursday evening I was going to attempt to change my filter, I took the 2 doors off the front of my Bryant Horizontal Furnace and was looking for filter. With no luck, I gave up and put the 2 front covers back on. Now the RED LED light is on, not flashing just continuously on. What should I...

Red Led Light [ 1 Answers ]

I Have Replaced My Thermostat on My Furance and the red led light stays on .THE wires are hooked up the right way.Any Ideas?

View more questions Search