Ask Experts Questions for FREE Help !
Ask
    Jim_Tidwell's Avatar
    Jim_Tidwell Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2010, 07:24 AM
    Q674L thermostat wiring
    Changing to hunter 44860. I have a Honeywell T874R 1368 and there are 7 wires. There is an X terminal in the old and I don't see where it should go. I need a labeled wiring for the old Honeywell... jt
    Jim_Tidwell's Avatar
    Jim_Tidwell Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 19, 2010, 07:25 AM

    Changing to hunter 44860. I have a Honeywell T874R 1368 and there are 7 wires. There is an X terminal in the old and I don't see where it should go. I need a labeled wiring for the old Honeywell... jt
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

I have a hot water heating system , the thermostat uses 12/2 wiring what thermostat [ 5 Answers ]

I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...

Replacing T874R/Q674L with RTH7600D 1006 [ 19 Answers ]

I am trying to replace my thermostat and need help. my old thermostat is a T874R with Q674L sub. The wiring diagram can be seen here. http://customer.honeywell.com/techlit/pdf/60-0000s/60-1152.pdf Page 9, Fig. 14. T is not used.

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?

View more questions Search