Ask Experts Questions for FREE Help !
Ask
    momk46's Avatar
    momk46 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 17, 2010, 04:14 PM
    1990 brain for mazda 5 speed truck
    I have a 1990 mazda 5 speed manuale truck the brain or main module keeps going out I can't find them and the ones I do find are rebuilt were can I find this part and why do they keep burning out? Thanks
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jun 17, 2010, 05:16 PM

    If you mean Ignition Control Module:

    Be sure to apply silicone heat transfer compound to the back of the Ignition Control Module (ICM). Arctic Silver 5 is recommended by an AMHD member, which is available at Radio Shack.


    If the ICM and the heat sink are simply placed together, the small air gaps (insulator) that naturally exist between them will inhibit heat transfer. By filling these gaps, the compound allows a direct path through which heat can travel. Failure to apply this grease is one reason why some Hondas suddenly die. Attention to detail makes a big difference with modern-day electronics.

    AutoZone carries new ICMs for your truck ($93.99).

    If you mean Engine Control Module (ECM):

    Shop for a remanufactured ECM with a Lifetime Warranty. O'Reilly Auto Parts used to offer Cardone remanufactured ECMs with a lifetime warranty. I presume they still do.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #3

    Jun 18, 2010, 07:04 AM

    Check with AutomotiveElectronicSolutions.com for ECMs, rebuilt or remanufactured with warranties, as well as new.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Will not start on 1990 mazda miata [ 2 Answers ]

I have a 1990 mazda miata it will not start before it stop on me it started to run rough it started to sputter but it would get up to speed if I step on the gas it would sputter but it would run I'm getting fire to plugs fuel thought filter tried starter fluid but will not start I'm about to check...

Why does my 1990 Mazda B2200 sputter at certain rpm [ 1 Answers ]

I have a 1990 Mazda B2200 with a standard 5 speed transmission and a carburated,4 cylinder engine.It seems to run better at different times,but has a,"what seems to be", Jerky,loss of power at other times! Any input on what may be causing this,would be great! Thank You!!

How to check out a clutch on mazda truck [ 1 Answers ]

I have a 2000 Mazda B2500 that when I press my clutch it still doesn't want to come out of gear. I have to turn the truck off to get it out of gear and in gear. Any suggestions?

1990 Mazda 121 act of defiance [ 23 Answers ]

My little Mazda 121 that has been reliable until a couple of weeks ago conked out just as I'm about to purchase a new car. While the engine starts, it doesn't kick over so isn't going anywhere. Any ideas what it could be? Rego runs out on 9 March and all I want to do is drive it 10 minutes away...

1990 Mazda Miata no Start [ 3 Answers ]

I have a 1990 Miata and it will not start,I got the car from an person that pulled the motor out and done some repairs and replaced it, and it would not start, I checked it and it had no Fire at the plugs or the injectors and the fuel pump would run all the time, I replaced the motor with another...


View more questions Search