Ask Experts Questions for FREE Help !
Ask
    gr8fuldog's Avatar
    gr8fuldog Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2010, 02:57 PM
    I replaced the 3 speed pull switch on my ceiling fan. But now it doesn't turn off.
    I had to replace the pull switch on my ceiling fan due to the chain being pulled out.. the original switch has this order.. L-BLACK 1-GRAY 2-BROWN 3-GREEN
    I've tried 2 different 3 speed switches and have hooked it up the same way as the original,but now I get a HIGH-HIGH-LOW speed no off... anyone have any input
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 21, 2010, 11:11 PM

    You did not replace it with the correct switch.

    What make is the fan?

    Ceiling fan pullchain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan will not work after replacing 3 speed pull chain switch [ 129 Answers ]

I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...

3 speed, 4 wire ceiling fan pull chain switch replacement [ 20 Answers ]

I recently changed the 3 speed 4 wire switch on a ceiling fan as the old one had a broken collar. I purchased a replacement at Lowe's. The replacement worked at high speed only. I was careful in noting which color wires went into slots 1,2, 3 & L. Thinking that the new switch was defective, I...

Replaced ceiling fan switch will not turn off [ 1 Answers ]

A replacement ceiling fan switch was purchased from Home Depot for a three speed Hampton Bay (Marco Polo) ceiling fan. Both the old and new switch had the same wire colors (L-black 1-grey 2-brown 3-purple) and the new switch was inserted according to the colors. The fan will not turn off now. Is...

Wall Speed control on old ceiling fan install new with pull switch [ 3 Answers ]

I have an old celing fan purchased in the 80's with a wall mount speed control knob. I purchased a Hampton Bay, Huntinton III 522-306 3 speed control with a pull chain. When installing the unit the fan does not work. I have a white wire, a black wire, a blue wire for the light and a ground...

Ceiling Fan Pull String 3-speed Switch [ 1 Answers ]

What if someone by mistake wrongly connect the load on the switch (L) to one of the other wires (yellow, red, green)? Can this (cross wiring or mixing) cause (cross-wire) damage to the motor? Please help. I need this help urgently.

View more questions Search