 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
You need to reset the frequency of the remotes and fans. If that doesn't work you may have bad receivers. See:
Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm trying to swap out the old ceiling fan in my living room and the metal box in the ceiling only has 1 white wire and 1 black wire. No ground, no screw, no clip. So what do I do with the ground wire from the fan? There is also no ground screw on the bracket. I have installed ceiling fans in the...
Inside the fan switch and reversing housing where light is to be hooked up, some wires were undone, thin purple from fan forward & reverse switch, med purple from motor, thin yellow and thin blue from motor, med white and blue is to light, all the rest are OK. Where do these go? Ceiling fan model...
I am having a problem with our Hunter remote controlled ceiling fan. It worked properly for two years, the this started, it has been checked and is properly wired, etc. I call it the haunted fan. You leave the room and the light and the fan are off, later you return to the room and either or both...
I have read everything I can find regarding problems with ceiling fans but haven't found an answer to my question. My ceiling fan which I bought 1 1/2 years ago quit working entirely. Unfortunately, I can't find the manual (or the receipt). How do I know whether it's a problem with the remote or...
Hello I have just installed a brand new Hampton Bay ceiling fan. The fan comes on but the light that is underneath doesn't. The wiring system that I had came with a male and female plugging unit. I matched up the colors on the plug but the light that is underneath the fan doesn't come on. Any...
View more questions Search
|
