Ask Experts Questions for FREE Help !
Ask
    mcgruff672's Avatar
    mcgruff672 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 15, 2010, 08:15 AM
    How do you attach a wood strip to corian?
    I'm replacing my kitchen cabinet cutting board with corian. I want to take the oak trim from the old cutting board and attach it to the new corian cutting board.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jun 15, 2010, 10:16 AM

    How thick is the Corian? What does the oak trim look like?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #3

    Jun 15, 2010, 08:34 PM

    Rough up sides of corian. Cut trim(miter) to fit. Dry fit it to corian. Apply contact cement to both trim and corian. When putting together be very careful. Must be exact. Use paper between corian and trim to get trim in right place. Then remove paper.

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat strip only gets a little hot on top strip on the bottom it will not get red [ 1 Answers ]

Luxaire heat strip will only get warm on top strip around 70 bottom will not get anything. If you switch the wires, the bottom is warm top has nothing.

Best way to attach wood top plate to ICF wall [ 0 Answers ]

Hello, I am the homeowner. ICF walls are poured with j-bolts spaced along the top horizontal edges. My 2x10 and 2x12 pressure treated top plates are stacked down on the slab. They used them as walk-boards during the pour. Walls are 9" reward wall and some 11" reward wall. I have several...

Strip wood paneling [ 3 Answers ]

Is it possible to strip the paint off the wood panelling in my 1946 home's walls to return them to their original state?

How to bond Corian shelves to Corian shower walls? [ 3 Answers ]

About 4 years ago, I had a Corian shower installed because I preferred it to tile/grout. I thought that the technology allowed for the (essentially) PERMANENT bonding of Corian to Corian so I had 3 small corner shelves installed to hold soap, shampoo, etc. Now, one shelf has fallen off, one is...

How can you attach a wood wall to concrete floor? [ 4 Answers ]

I need to build wood wall non bearing in a basement and attach the bottom plate to a concrete floor. What is the easiest and most secure method to do so. Should I use pressure treated wood for the bottom plate? Thanks.


View more questions Search