Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat strip only gets a little hot on top strip on the bottom it will not get red
[ 1 Answers ]
Luxaire heat strip will only get warm on top strip around 70 bottom will not get anything. If you switch the wires, the bottom is warm top has nothing.
Best way to attach wood top plate to ICF wall
[ 0 Answers ]
Hello, I am the homeowner. ICF walls are poured with j-bolts spaced along the top horizontal edges. My 2x10 and 2x12 pressure treated top plates are stacked down on the slab. They used them as walk-boards during the pour. Walls are 9" reward wall and some 11" reward wall. I have several...
Strip wood paneling
[ 3 Answers ]
Is it possible to strip the paint off the wood panelling in my 1946 home's walls to return them to their original state?
How to bond Corian shelves to Corian shower walls?
[ 3 Answers ]
About 4 years ago, I had a Corian shower installed because I preferred it to tile/grout. I thought that the technology allowed for the (essentially) PERMANENT bonding of Corian to Corian so I had 3 small corner shelves installed to hold soap, shampoo, etc. Now, one shelf has fallen off, one is...
How can you attach a wood wall to concrete floor?
[ 4 Answers ]
I need to build wood wall non bearing in a basement and attach the bottom plate to a concrete floor. What is the easiest and most secure method to do so. Should I use pressure treated wood for the bottom plate? Thanks. View more questions Search
|