 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The washer runs through the wash cycle but when it is suppose to drain it does nothing. There is no hum just dead. I drained the tub out and disconnected the hose from the back thinking the drain was plugged. But when I did this the rest of the water from the tub drain out no problem. I'm...
My clothing is coming out of the washer with lint on it. Is there a lint trap that I can clean?
Am not able to get hot water to come out... am only able to get cold water washing done. Any clues on this? It was working perfectly and now it isn't.
I have a Whirlpool Ultra care II washer, model LSQ9659LW1. It was going into rinse cycle, stopped and began making a grinding noise. I stopped the washer and let it sit, then started back again with no change. The washer is sitting with a full load of laundry. Thank you in advance.
I have a Whirlpool Ultimate Care 2 washer that will begin a cycle, but stalls before finishing and won't drain. When it stalls it goes completely silent. So currently it's sitting silently half full of water. I'm a fairly handy guy around the house, but know nothing when it comes to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
